Automated Transit Networks (ATN), and the small-vehicle subset of Personal Rapid Transit (PRT), are emerging technologies that can help solve the related problems of congestion, dependence on foreign oil, and planetary climate disruption. ATN/PRT offers clean, quiet, responsive public transit with automated non-stop service available 24 hours a day. In addition to these service benefits, PRT costs far less to build and operate than other transit options ¯ and is safer than walking and cycling on nearby busy streets.
All the models we tested are full suspension all mountain/trail bike models with relatively similar amounts of suspension travel, geometry, and wheel/tire size. The addition of a large battery and a small motor adds significant weight to an e-bike and they generally weigh in the neighborhood of 50 lbs, approximately 20 lbs heavier than non-e-bikes, and the massive weight of these bikes makes them more difficult to ride without the support of the pedal assist motor.
Consider, too, that more than half of all driving trips are shorter than 10 miles, with some surveys reporting that the average single trip amounts to just 5.95 miles. That’s a no-brainer distance to cover by e-bike. In fact, the survey found that owners replaced 46 percent of their car commutes and 30 percent of their driving errands with e-bike rides. All you need is a great commuter bag to carry your stuff, and you’re set.
When all was said and done, the Commencal Meta Power Race 650B+ proved to have everyone's favorite e-bike controls. Commencal uses the Shimano Steps E8000 motor and system which features ergonomic thumb shifters, a small but easy to read digital display and a secure and straightforward charging connection. The ergonomic shifter of the Shimano system is better than the electronic buttons found on both the Specialized, HaiBike and Trek. The Commencal's best-in-the-test digital display also proved to be a favorite for its small size and out of the way mounting location, easy to read at-a-glance information, and color-coded support settings information. The HaiBike's Yamaha PW-X motor and system also featured a digital display, but testers thought it was a little too big, displayed too much information, was more challenging to read, and generally felt a little more clunky and less refined than the Shimano system. That Trek Powerfly's Bosch Purion shifter and display unit was easy to read and had a bright screen, but was in a less visible location on the left side of the handlebar. Our Editor's Choice Award winner, the Specialized Turbo Levo FSR Comp 6Fattie scored the lowest in this rating due to the lack of a handlebar mounted display and a less user-friendly charging connection.
Over the years our lineup has grown, and as a result, the offering has become more complicated than it needs to be. Specifically, this year we introduced a 500w geared motor option to the lineup and that has created some redundancy. Before outlining changes, we would like to ensure everyone that we will be stocking enough inventory of previously sold parts for a long enough time to ensure all warranties...
REBEL electric bikes powered by the Yamaha central motor create Dynamic and Responsive Power. It also enables the use of a conventional groupset and offers no resistance in «no assistance» mode. The eMTB bikes range have an “External DT System” battery, located in the front triangle and integrated with the design of the frame. The relative position of the less lightweight parts of the system (motor and battery) enables a low center of gravity, guaranteeing a reactive and stable ebike. See the REBEL electric bike models...
With over a decade of experience as an advertising executive, Mark is certain that the market will accept the electric bike and is here to make sure it happens. Mark has an impressive list of former clients in industries like pharmaceuticals, convenience stores, community banks, floor coverings, visitors’ bureaus, resorts and Location Based Services (LBS). When he’s not on Facebook, tweeting or learning how to leverage the latest viral marketing techniques,...
The two most common types of hub motors used in electric bicycles are brushed and brushless. Many configurations are available, varying in cost and complexity; direct-drive and geared motor units are both used. An electric power-assist system may be added to almost any pedal cycle using chain drive, belt drive, hub motors or friction drive. BLDC hub motors are a common modern design. The motor is built into the wheel hub itself, and the stator fixed solidly to the axle, and the magnets attached to and rotating with the wheel. The bicycle wheel hub is the motor. The power levels of motors used are influenced by available legal categories and are often, but not always limited to under 750 watts.
eMTBs appeal to an extremely broad target group: some use their eMTB for daily commuting, others for after-work or weekend rides on maintained gravel roads, and others plan to do an electrified alpine traverse or even an action-packed visit to the bike park. The good news is that many eMTBs are jacks of all trades, covering a very wide range of uses. Others, unfortunately, may disappoint with poor spec or nervous handling.
An electric bicycle, also known as an e-bike, powerbike or booster bike, is a bicycle with an integrated electric motor which can be used for propulsion. Many kinds of e-bikes are available worldwide, from e-bikes that only have a small motor to assist the rider's pedal-power (i.e., pedelecs) to somewhat more powerful e-bikes which tend closer to moped-style functionality: all, however, retain the ability to be pedalled by the rider and are therefore not electric motorcycles.