It’s probable that GM was hoping for more press for its announcement of the same day as Musk’s interview going live, that it had actually built and was going to sell a pair of electric bikes. It launched a $10,000 naming contest. The bikes were built in-house by GM, including engineers who had worked on the Bolt. The Director of General Motors Urban Mobility Solutions, Hannah Parish said:
The new Electric Bike Kit Owners group on Facebook has taken off within the first week of its creation. Around 400 people have joined the online group with new members being added every day. E-bike riders are sharing the various ways that they have converted their bikes using the E-BikeKit Complete Electric Bike Conversion System. Each one of the electric bike conversions is more unique than the next. Some e-bike...
With 170mm travel, aggressive angles and Shimano’s superbly calibrated STEPS motor, the Focus Sam2 is an enduro bike with a built-in shuttle. With the bolt on TEC pack you really can climb to new heights, but without it the smaller capacity internal battery means you need to be ultra economical with your energy use. It’s also frustrating that the internal battery can’t be removed easily for charging. By far the biggest frustration with the Jam2 though is that the sizing isn’t very generous and standover clearance is limited. It’s still a great e-bike, but when you’re spending this much money, you can afford to be fussy.
E-bikes can also provide a source of exercise for individuals who have trouble exercising for an extended time (due to injury or excessive weight, for example) as the bike can allow the rider to take short breaks from pedaling and also provide confidence to the rider that they'll be able to complete the selected path without becoming too fatigued[58] or without having forced their knee joints too hard (people who need to use their knee joints without wearing them out unnecessarily may in some electric bikes adjust the level of motor assistance according to the terrain). A University of Tennessee study provides evidence that energy expenditure (EE) and oxygen consumption (VO2) for e-bikes are 24% lower than that for conventional bicycles, and 64% lower than for walking. Further, the study notes that the difference between e-bikes and bicycles are most pronounced on the uphill segments.[59] Reaching VO2 Max, can really help your body as a whole[60]. Professor Janet Lord of Birmingham University in the UK published a study that looked at older cyclists, ““The study looked at muscle mass, blood cholesterol, their VO2 Max, lung function, and in many of those measures we found they didn’t age! No loss of muscle, their bones were a little thin (but nothing like the general population), their blood pressure didn’t go up.[61]
Power delivery is smooth and easy to predict, once you get the hang of it. We’re not sure if integration is better on the Turbo road bike, or if the slow, technical nature of trail riding just highlights some quirks. The motor shuts off less than a second after you stop pedaling, and the onset of power delivery is momentarily delayed once you begin pedaling. And this did mean we had to adapt our riding style a little bit to deal with that slight lag. 
Michael Barnard is a C-level technology and strategy consultant who works with startups, existing businesses and investors to identify opportunities for significant bottom line growth in the transforming low-carbon economy. He is editor of The Future is Electric, a Medium publication. He regularly publishes analyses of low-carbon technology and policy in sites including Newsweek, Slate, Forbes, Huffington Post, Quartz, CleanTechnica and RenewEconomy, with some of his work included in textbooks. Third-party articles on his analyses and interviews have been published in dozens of news sites globally and have reached #1 on Reddit Science. Much of his work originates on Quora.com, where Mike has been a Top Writer annually since 2012. He's available for consulting engagements, speaking engagements and Board positions.
In addition, Kalk weighs under 155 pounds — less than half of traditional motorbikes. Cake customized parts of the drivetrain and implemented an interior permanent magnet (IPM) motor. On a single charge, the bike travels up to 50 miles and as a bonus feature, maintenance is minimal due to the fact there are few moving parts thanks to its lack of a combustion engine.

There are two main types of motor to suit different riding styles. The durable, "heavy duty" Direct-Drive motor, and the lightweight, efficient and fast "performance" geared motor. Electric Bike Motors, hub motors in particular, and electric bike batteries are what make electric bicycles go. Using a hand throttle you control the flow of electric current from the battery to the brushless motor. With an intelligent 20 Amp controller regulating the...


Hikers on Mt. Tam used to say we're crazy. Roadies called it a fad. Clunkers, tension discs— we left our eyes open, heads down, and kept designing. We kept evolving, and today, the Men's Turbo Levo FSR embodies a design unimaginable 40 years ago—a trail bike with pedal-assisted power on the climbs. A trail bike that gives you the power to ride more trails.
This is a question the designers and engineers of the FOCUS and BULLS bikes of this group test asked themselves. Instead of speccing them with the standard 500 Wh batteries, both have developed a sophisticated alternative. The idea: instead of riding around with unnecessarily large batteries and unnecessary weight on short tours, they integrated a smaller 375 Wh or 378 Wh battery into the bike. If you don’t have enough power for long loops, you can double the range of both bikes with an additional battery for up to a full 750 Wh. While the second battery is mounted in the front triangle of the FOCUS, it disappears sideways in the downtube of the BULLS. In practice, you’ll need the second battery relatively often with both bikes, and in either case, you should consider the additional € 499 investment in a second battery pack when you buy the bike.
On the AM 4 you get 150mm of travel via a Fox Factory 36 Float fork, 11-speeds from a Shimano Deore XT drivetrain, and Magura MT-Trail hydraulic disc brakes. They also don’t gip you on the dropper with a wonderful, wonderful KS Lev. In terms of geometry, the build is pretty dope. It’s a nice slack feel, so you can do some solid downhills. A DT Swiss wheelset along with Magic Mary tires give you a lightweight and smooth ride.
On mine I got the Topeak front and SKS rear mud guards, an Axiom rear rack, front and rear lights. They didn’t have a headlamp with the lumens I wanted, so Tommy the owner went ahead and ordered one for me! He was always available for any question I may have had through his mobile phone, and updated me with pictures showing me different possible setups to see if I would like it.
So i am 15 years old. I drive to school every single day and go to the gym about 4 times a week. My bike is starting to let me down, and in march i will be 16. I want to go immeadietly for my driver license when i can, so i don’t want to study for so long and get my scooter license and pay a couple of thousand to get one, just to do it all over when i go for my driver license. Do you advise me to get my Ebike now? Or wait until i can get my scooter? And if i should get it, do you advise i build my own? I hear it’s like a pc, since you can get the performance of a 2000 dollar ebike with a 600-800 dollar bike you build yourself. Can Anyone advise me on these grounds?
It is important to note that the less power you use while riding your e-bike, the longer the battery will last, makes sense right? All of the pedal-assist drive units we tested also have smartphone apps that can be used to customize your support settings, and such changes may allow for more or less range on your electric mountain bike. Specialized's Mission Control app has a feature that lets you set a predetermined route, and the app then regulates the motor's support to ensure power lasts to finish your ride.
Range is a key consideration with e-bikes, and is affected by factors such as motor efficiency, battery capacity, efficiency of the driving electronics, aerodynamics, hills and weight of the bike and rider.[36][37] Some manufacturers, such as the Canadian BionX or American Vintage Electric Bikes,[38] have the option of using regenerative braking, the motor acts as a generator to slow the bike down prior to the brake pads engaging.[39] This is useful for extending the range and the life of brake pads and wheel rims. There are also experiments using fuel cells. e.g. the PHB. Some experiments have also been undertaken with super capacitors to supplement or replace batteries for cars and some SUVS. E-bikes developed in Switzerland in the late 1980s for the Tour de Sol solar vehicle race came with solar charging stations but these were later fixed on roofs and connected so as to feed into the electric mains.[40] The bicycles were then charged from the mains, as is common today. While ebike batteries were produced mainly by bigger companies in past, many small to medium companies have started using innovative new methods for creating more durable batteries. State of the art, custom built automated precision CNC spot welding machines[41] created 18650 battery packs[42] are commonly used among Do-it-yourself ebike makers.
The two most common types of hub motors used in electric bicycles are brushed and brushless. Many configurations are available, varying in cost and complexity; direct-drive and geared motor units are both used. An electric power-assist system may be added to almost any pedal cycle using chain drive, belt drive, hub motors or friction drive. BLDC hub motors are a common modern design. The motor is built into the wheel hub itself, and the stator fixed solidly to the axle, and the magnets attached to and rotating with the wheel. The bicycle wheel hub is the motor. The power levels of motors used are influenced by available legal categories and are often, but not always limited to under 750 watts.
×