Glenn has over 15 years of experience building bicycle wheels and has worked for and with the local cycling community in the Philadelphia area for the past 20 years. Glenn is in charge of all wheel building activities at E-BikeKit and oversees quality control on wheels built in the Newportville, PA location. Since joining E-BikeKit in early 2010 Glenn has had a huge impact on the success of the company...
Aluminium alloy frames and downtube mounted batteries with integrated motors provide a budget friendly introduction to these motor-assisted bikes, allowing riders who would struggle to keep up to enjoy the stamina of the pros. For those hard hitters, fully integrated battery and motors combine with lightweight alloy and carbon frames to deliver a ride that’ll take on the most demanding trails.
BattleBots legend Christian Carlberg and his company C2 Robotics are using Electric Bike Technologies direct drive hub motors to power 'OverDrive', their latest BattleBot on ABC!   Team C2 Robotics is set to battle again tonight at 9pm EST on ABC! For the past two decades Christian Carlberg and the C2 Robotics Team have been making remote control mobile platforms for commercial, military and the entertainment industries. With the advance of brushless...
Not all e-bikes take the form of conventional push-bikes with an incorporated motor, such as the Cytronex bicycles which use a small battery disguised as a water bottle.[44][45] Some are designed to take the appearance of low capacity motorcycles, but smaller in size and consisting of an electric motor rather than a petrol engine. For example, the Sakura e-bike incorporates a 200 W motor found on standard e-bikes, but also includes plastic cladding, front and rear lights, and a speedometer. It is styled as a modern moped, and is often mistaken for one.[citation needed]
Catrike Expedition converted with a 26" Performance E-BikeKit This Catrike Expedition was a custom conversion done at Electric Bike Technologies in Croydon, PA. If you have a Catrike Expedition and wish to convert it on your own, the following may help. If you would like to purchase the kit and add-ons used in this conversion, you can order them from our online shop or call us at 866.882.3245 M-F 9am-5pm EST....
Weight isn’t anything like a critical as one would assume. Weight distribution however is a different matter and this is where geometry, specifically the ratio of the front centre measurement to the chain stay length really comes into play. Battery placement is important too, and smaller batteries give an edge in the handling stakes while robbing the bike of range.
The Electric Fat-Tad Recumbent Trike is built regularly for customers of www.ElectricTrike.com by Electric Bike Technologies in Croydon, PA. If you already have a Sunseeker Fat-Tad and wish to convert it on your own, or if you wish to buy one locally to convert on your own, the following may help as guide to your conversion. If you would like to purchase the kit and add-ons used in this conversion, you can...
With over 30 years of professional sales experience and a passion for cycling, Brian brings a level of business acumen to E-BikeKit that ensures we’re laying the groundwork for long-term success.Brian is committed to helping make the most informed decisions that will guide the E-BikeKit product and brand in the right direction. “As an eco-friendly consumer and a baby boomer myself I know the value of the electric bike for those in...
In the year 1885, a British man named J.K. Stanley introduced what can fairly be described as the first modern bicycle. His Rover bike had wheels of equal size in the front and back and used a chain connecting the pedals and the rear wheel as a propulsion system. It was often marketed as a safety bike in contrast with the unstable Penny Farthing, and was a smashing success. The company went on to develop motorcycles and automobiles, remaining in business until the year 2005.

Descents on such a heavy bike are less fun. Getting the rear wheel off the ground on short notice, or whipping it around turns is very hard. I like to use my rear tire and brakes to steer—locking the brakes in tight corners at speed, then letting off and pedaling out. On very loose and exposed trails, using that approach on the Turbo Levo doesn't work, once the rear starts to loose traction, it’s just all over. Perhaps this could be combated with lower rear tire pressures; we were running 20 PSI. 

Bottom Line The Specialized Turbo Levo FSR Comp 6Fattie was the most well rounded bike in our test, the winner of our Editor's Choice Award. Commencal's first foray into the e-bike market was worth the wait with a hard charging ride that utilizes their Meta frame design and Shimano's E8000 motor. The HaiBike XDURO AllMtn features a powerful pedal assist motor, but in a less refined package. The Trek Powerfly 7 FS is a good electric mountain bike, but its component specification is holding it back from reaching its potential.
X-Treme Scooters Folding Electric Mountain E-Bike offers a comfortable ride with front and rear suspension. It is an ideal bike for the college students, campers, and anyone who wants a portable and lightweight mode of transportation. This E-bike works on a motor of 300 watts. The best thing about this bike is it allows you to fold it after reaching the destination. It gives you a speed of about 20 mph with a 7-speed Shimano tourney gears. You can adjust the seat according to your ease.
Weight isn’t anything like a critical as one would assume. Weight distribution however is a different matter and this is where geometry, specifically the ratio of the front centre measurement to the chain stay length really comes into play. Battery placement is important too, and smaller batteries give an edge in the handling stakes while robbing the bike of range.

The downhill performance is our most highly weighted rating metric because we feel that the most important element of an e-bike is how well it performs out on the trail, especially when bombing down the hill. Each tester rode every bike numerous times and formulated their own opinions of each model, considering how factors like the component spec, geometry, and frame design play a role in its downhill performance. All of the e-bikes we tested were fun to ride, way more fun than any of our non e-bike riding test team ever expected, but they all had a different demeanor and trail manners. To test this, we rode the bikes downhill, a lot, and took them down a variety of terrain, from fast and flowing open trails to tight low-speed technical, and everything in between.
There’s no getting around it: E-bikes give you yet another device to charge. Right now, you can expect your battery to last anywhere from 35-100 miles before it needs a recharge. Where you fall in that range depends on the size of the battery and how much power the motor draws. Obviously, if you buzz around on “turbo” all day, you’ll run out of juice faster than if you run on lower, more economical settings. But we also expect batteries to improve in the future.
In a parallel hybrid motorized bicycle, such as the aforementioned 1897 invention by Hosea W. Libbey, human and motor inputs are mechanically coupled either in the bottom bracket, the rear wheel, or the front wheel, whereas in a (mechanical) series hybrid cycle, the human and motor inputs are coupled through differential gearing. In an (electronic) series hybrid cycle, human power is converted into electricity and is fed directly into the motor and mostly additional electricity is supplied from a battery.
×