But astute readers are surely wondering about the specs, as are we. Unfortunately, there is little to no information on it … making it a bit difficult to come up with a fitting name. But, seriously, the only thing we know so far is that it will have a USB charging port and LED lights, according to GM. The automaker bikemaker is keeping everything else secret. Perhaps as it simply hasn’t decided on the final specs. We’re waiting for company comments.
The Best in Test and Best Value tips do not result from the sum of star ratings, but by the assessment of the entire test team, taking into account the overall concept of the bike. It would be methodologically wrong to only add up the star ratings to make a final judgment in a scoring system – saying that something is “good” will not help anyone if they don’t know what it is for and for whom it is “good.” For this reason, we give a clear recommendation in every test result for which type of rider and purpose the bike is suitable and which not. The bikes themselves are as individual as the riders are – we just want to provide you with all the information you need to make a well-informed decision before buying. Here’s to long-lasting fun!
Controllers for brushed motors: Brushed motors are also used in e-bikes but are becoming less common due to their intrinsic lower efficiency. Controllers for brushed motors however are much simpler and cheaper due to the fact they don't require hall sensor feedback and are typically designed to be open-loop controllers. Some controllers can handle multiple voltages.
My left crank arm came loose and seems to have damaged the square bottom bracket mount. I assumed the bottom bracket was just a standard square taper, but noticed it says “8fun” on it. However, I can’t seem to find an 8fun bottom bracket available online, so I can’t figure out what part I need—I suspect there is a something obvious that I’m missing. Any ideas to get me back on the road? Thanks all.
You can’t really get a cheap e-bike just yet. But if you keep the car in the garage more often, you’ll save cash on maintenance and gas money. Not to mention the added health benefits and potentially fewer sick days from getting more exercise. Prices vary widely, but you should expect to pay at least $1,500 for a decent e-bike, and considerably more ($2,500-$5,500) for a quality bike with a motor system from a major manufacturer like Bosch, Shimano, or Yamaha.
XB-300-SLA X-Treme Electric Mountain Bicycle is a great bike for the novice as it is easy to ride with simple steps. It is an affordable bike with high-quality features that work on a motor of 300 watts and offers a speed up to 20 MP on a single charge. It takes up to 4 hours to fully recharge the battery for the next use. The comfortable padded seat, 18-inch steel frame, 7-speed tourney gear, 24V lead acid battery, power assist system, and steel front forks are a few features that make it popular.
In Stock & Free Shipping now! COLLAPSIBLE FRAME: The electric bicycle adopts 100 percent lightweight aluminum alloy collapsible frame for quick folding and easy storage. You can have it with minimal storage space and easily store into any vehicle. BRAKE & PREMIUM QUALITY: Front and rear disc brakes fully protect your safety. The front fork is made of high-strength carbon steel and packed with premium comfort shock absorption, double layer aluminum alloy wheel. The bright LED headlamp and horn is equipped for night riding. REMOVABLE LITHIUM BATTERY: The removable 36V 8AH lithium Ion battery, equipped with smart lithium battery charger...
This past July 1st we moved our location to Croydon, PA and doubled our space. Additionally we're looking to hire at least 2 additional employees! This is all to support our expanding conversion kit business and to support some new business we have planned starting in September (more to come on that soon). We would like to thank every single one of our customers, partners, associates and fans for your...
There are two basic categories of electric bike, and their uses don't offer equal crossover value. The first category is essentially a normal bicycle that has been outfitted with an electric motor. These bikes are the same size as a standard bicycle, and handle almost identically, save for the obvious benefit of added motive power thanks to a motor and battery.
REBEL electric bikes powered by the Yamaha central motor create Dynamic and Responsive Power. It also enables the use of a conventional groupset and offers no resistance in «no assistance» mode. The eMTB bikes range have an “External DT System” battery, located in the front triangle and integrated with the design of the frame. The relative position of the less lightweight parts of the system (motor and battery) enables a low center of gravity, guaranteeing a reactive and stable ebike. See the REBEL electric bike models...
When riding a normal bike through creek crossings, and rock gardens, I typically stop pedaling often to avoid pedal strikes, and to maneuver the bike. This approach is not compatible with the Turbo Levo’s weight. On it, continual pedaling was necessary, but the big tires and well-damped suspension enabled me to roll over obstacles I’d typically try to avoid, with the motor helping me power over them smoothly. To make this constant pedaling possible without pedal strikes, the bottom bracket is moved higher and Specialized has spec’d 170mm cranks that are a tad shorter than normal.
Because e-bikes are capable of greater speeds for longer periods of time than standard bikes, you want extra control. Wider tires provide traction and some bump absorption with little penalty. You also want strong brakes to slow you (and all that extra weight) easily. It's worth looking at the quality of the brakes and investing in bikes with better ones if you can.
After 2 months of online research and talking to people that owned e-bikes I walked into the Glendale, Arizona Pedego store. I met the owners Sherry and Steve. They suggested I try the Ridge Rider as it might be a fit for me. I test rode it for about 45 minutes to an hour and was somewhat convinced this could be the bike for me. I went home and did more research on the Ridge Rider. After careful thought I decided to purchase one the next day. Since then Steve, the owner, has worked with me to personalize my bike so that it is as comfortable on the trails as it is on the road. I cannot say enough about the after sale experience I have received from Sherry and Steve. I would recommend them and their store to anyone interested in an e-bike.
Catrike Expedition converted with a 26" Performance E-BikeKit This Catrike Expedition was a custom conversion done at Electric Bike Technologies in Croydon, PA. If you have a Catrike Expedition and wish to convert it on your own, the following may help. If you would like to purchase the kit and add-ons used in this conversion, you can order them from our online shop or call us at 866.882.3245 M-F 9am-5pm EST....
All models of the Turbo Levo use a frame made from M5 aluminum alloy, with the motor and removable battery integrated inside. The frame and fork use 148mm (rear) and 110mm (front) spacing. Specialized 6Fattie Purgatory (front) and Ground Control (rear) 3-inch wide tires are laced to 38mm Roval Traverse rims. Rear stays and pivots are beefed up to handle the additional weight (48.5 lbs) and torque, and bridges are added to the stays, over the non-motorized Stumpjumper. The front fork is a RockShox Yari XC with a 15mm thru-axle. The 135mm rear travel is provided by a custom Fox Float Performance DPS shock with automatic sag adjust.
Nicolas Zart Nicolas was born and raised around classic cars of the 1920s, but it wasn't until he drove an AC Propulsion eBox and a Tesla Roadster that the light went on. Eager to spread the news of that full torque, he was invited to write for various CleanTech outlets in 2007. Since then, his passion led to cover renewable energy, test drives, podcasts, shoot pictures, and film for various international outlets both in print and online. Nicolas offers an in-depth look at the e-mobility world through interviews and the many contacts he has forged in those industries. He particularly enjoys communicating about the new e-mobility technology and what it means to us as a society. Today he focuses most of his writing effort on CleanTechnica, a global online outlet that covers the world of electric vehicles and renewable energy. His favorite tagline is: "There are more solutions than obstacles."
Basically, there is no reason to ride an eMTB with less than 130 mm of travel. With classic bikes, more travel usually means both less efficiency and poorer climbing characteristics, but this is not true with eMTBs – at least not up to a certain point. The best example is the Specialized Turbo Levo, which with its 135 mm of travel at the rear handles much better than most of the other, longer travel bikes in the group test. Also, eMTBs with suspension travel of 180 mm or more are often noticeably less efficient, as clearly exemplified in this test by the Haibike XDURO Nduro. It climbs a lot slower than other bikes using the same motor and the same level of assistance, an experience you will find with almost all other long-travel bikes from other manufacturers. The exception is the BULLS E-CORE EVO EN Di2: in direct comparison, it climbs a lot more efficiently, even though it also offers 180 mm of travel. The ideal compromise between uphill and downhill performance usually lies somewhere between 130 and 160 mm of travel.
In a parallel hybrid motorized bicycle, such as the aforementioned 1897 invention by Hosea W. Libbey, human and motor inputs are mechanically coupled either in the bottom bracket, the rear wheel, or the front wheel, whereas in a (mechanical) series hybrid cycle, the human and motor inputs are coupled through differential gearing. In an (electronic) series hybrid cycle, human power is converted into electricity and is fed directly into the motor and mostly additional electricity is supplied from a battery.