This article first appeared in Electric Bike Report in June of 2013. Since then, we’ve made some changes to our motor selection - our Direct-Drive motors are now all High-Torque 6x9 wound, so they run slower (approximately 15mph at 36v or 20mph at 48v), and our Geared Motors have been replaced by a 500w version, (approximately 20mph at 36v or 28mph at 48v). The Direct-Drive is now our Heavy-Duty motor and the...
Where in the fitness manual does it say that getting fit has to mean suffering? Nope, being active is getting the heart rate up and keeping the mojo high. The Crossroads is your key to weeknight workouts and rides with the family, offering a refreshing change from treadmills and dumbbells. And with the benefits of a Body Geometry saddle and grips, it's one bike that’ll keep you riding with a face that says 'joy' more than 'suffering.'
When I started looking beyond the legal regulations, I discovered something that further disturbed me: the mountain biking community is predominantly anti-eBike and quite vocal about it. Maybe it’s a minority that is louder online, but either way, I was shocked to see that mountain bikers and mountain bike organizations, such as International Mountain Bicycling Association (IMBA), are against sharing the trails with eBikes. While some of the online community spoke up in favor of eBikes, they were outnumbered by hardliners.
E-bikes use rechargeable batteries, electric motors and some form of control. Battery systems in use include sealed lead-acid (SLA), nickel-cadmium (NiCad), nickel-metal hydride (NiMH) or lithium-ion polymer (Li-ion). Batteries vary according to the voltage, total charge capacity (amp hours), weight, the number of charging cycles before performance degrades, and ability to handle over-voltage charging conditions. The energy costs of operating e-bikes are small, but there can be considerable battery replacement costs. The lifespan of a battery pack varies depending on the type of usage. Shallow discharge/recharge cycles will help extend the overall battery life.
Wide tyres are an absolute must on an eMTB. They offer more traction, provide extra comfort, increase stability, and they simply look cooler. Tyres with a width of 2.5″ – 2.8″ have proven to be the ideal size. The performance of the MAXXIS Minion tyres is particularly impressive; they provide the best grip and stability. To get the best performance, tyres should be ridden at approx. 1.2 – 1.6 bar air pressure.
A good hardtail can be your answer to both the perfect trail bike and the perfect on-road bike. Their lighter weight also means a faster ride off-road. Haibike offers a full range of 27.5 and 29er wheel size bikes for trails and cross riding. The XDURO and SDURO lines mean a selection of drive systems and a range of power that only Haibike offers.
E-bike usage worldwide has experienced rapid growth since 1998. In 2016 there were 210 million electric bikes worldwide used daily.[33] It is estimated that there were roughly 120 million e-bikes in China in early 2010, and sales are expanding rapidly in India, the United States of America, Germany, the Netherlands,[2] and Switzerland.[34] A total of 700,000 e-bikes were sold in Europe in 2010, up from 200,000 in 2007 and 500,000 units in 2009.[35]
When it comes to creating the world's fastest road bike, it isn't enough to tweak a frame's shape and rely on existing technology. Instead, the Venge was birthed from years of development and testing in our own Win Tunnel. We used it develop the individual parts, ensuring that they work together to form an aerodynamic advantage. This meant shaping the frame, seatpost, brakes, and Aerofly handlebars to be faster than the sum of their parts.

In full-electric mode, the Pedego City Commuter Classic Electric Bike is capable of moving at up to 20 mph for anywhere from 15 to 30 miles. There are two further options: power-assisted pedaling or fully "unplugged” riding. Renowned Shimano gears are easy to select. Seldom do we come across a product so universally praised by owners. It's not cheap, but comments like "Everything I hoped for!" and "Outstanding!" tell us that it's money well spent.
In 2012, two e-bike advocates completed the first 4,000-mile (6,400 km) transcontinental e-bike tour from New York to San Francisco to advocate for e-bikes in major cities across the U.S.[81] Pedego Electric Bikes is the best selling brand in the U.S. Many e-bikes in the United States are standard bicycles converted using a kit. In general, the kits include the motor (the majority of which are hub motors built into the front or rear wheel), a speed controller, throttle (usually twist-grip or thumb throttle), necessary wiring and connectors, and a battery. Several U.S. companies offer conversion kits which also offer advanced lithium battery packs. Major manufacturers also offer complete e-bikes. Trek offers a line of e-bikes using the Bionx system in which the rider programs the controller to determine how much effort the motor will give in response to rider effort, from 25% up to 200% of the rider's power. This system ensures a minimum level of rider participation and is also used to comply with many European laws mandating partial human effort before the motor engages.

The new Electric Bike Kit Owners group on Facebook has taken off within the first week of its creation. Around 400 people have joined the online group with new members being added every day. E-bike riders are sharing the various ways that they have converted their bikes using the E-BikeKit Complete Electric Bike Conversion System. Each one of the electric bike conversions is more unique than the next. Some e-bike...
The Electric Fat-Tad Recumbent Trike is built regularly for customers of www.ElectricTrike.com by Electric Bike Technologies in Croydon, PA. If you already have a Sunseeker Fat-Tad and wish to convert it on your own, or if you wish to buy one locally to convert on your own, the following may help as guide to your conversion. If you would like to purchase the kit and add-ons used in this conversion, you can...
By 1898 a rear-wheel drive electric bicycle, which used a driving belt along the outside edge of the wheel, was patented by Mathew J. Steffens. Also, the 1899 U.S. Patent 627,066 by John Schnepf depicted a rear-wheel friction “roller-wheel” style drive electric bicycle.[7] Schnepf's invention was later re-examined and expanded in 1969 by G.A. Wood Jr. with his U.S. Patent 3,431,994. Wood’s device used 4 fractional horsepower motors; connected through a series of gears.[8]
×